Main Menu

Uniform Tips

Started by JC004, May 12, 2015, 08:36:57 AM

0 Members and 1 Guest are viewing this topic.

MSG Mac

When blousing your trousers, blouse them from the inside. This keeps the trousers from riding up or becoming unbloused.

1. Put on trousers
2. put on boots
3. Lower the trousers, create an inside cuff and wrap the blousing band* around your cuff and boot.
4. Raise trousers, buckle belt.
The trousers will be taut when pulled up.

*Use the Velcro 1 inch blousing bands.
Michael P. McEleney
Lt Col CAP
MSG USA (Retired)
50 Year Member

LSThiker

Quote from: JC004 on May 17, 2015, 12:01:50 AM
This is when goons from Cotton Incorporated showed up at my front door, attempted to smother me with a bag of cotton, and told me that I had to replace it with their "Cotton - the fabric of our lives" song.

Well, if they send Zooey Deschanel.........{wondering how many times I can type no cotton}

abdsp51

Quote from: MSG Mac on May 17, 2015, 12:37:22 AM
When blousing your trousers, blouse them from the inside. This keeps the trousers from riding up or becoming unbloused.

1. Put on trousers
2. put on boots
3. Lower the trousers, create an inside cuff and wrap the blousing band* around your cuff and boot.
4. Raise trousers, buckle belt.
The trousers will be taut when pulled up.

*Use the Velcro 1 inch blousing bands.

Or you can place the issue GI bands into the cuff and crimp together.  Instant blousing and last for awhile. 
I agree velcro bands work wonders for blousing.

jhighman

Quote from: abdsp51 on May 17, 2015, 03:43:07 AM
Quote from: MSG Mac on May 17, 2015, 12:37:22 AM
When blousing your trousers, blouse them from the inside. This keeps the trousers from riding up or becoming unbloused.

1. Put on trousers
2. put on boots
3. Lower the trousers, create an inside cuff and wrap the blousing band* around your cuff and boot.
4. Raise trousers, buckle belt.
The trousers will be taut when pulled up.

*Use the Velcro 1 inch blousing bands.

Or you can place the issue GI bands into the cuff and crimp together.  Instant blousing and last for awhile. 
I agree velcro bands work wonders for blousing.

This trick is also quite helpful for those who are in the awful habit of wrapping their extra long boot laces around the tops of their boots. Instead, after lowering your trousers per these instructions, draw the laces as tight as you like and tie your first bow. Take the long ears and pull them up your leg. When you blouse the trousers with the band, also wrap them around the surplus boot lace.

It will take a little getting used to, but looks so much more squared away.

JC004

I use the 2 inch Velcro elastic bands and fold them in half.

I'm pretty sure my Infantry Combat Boots came with instructions that said to wrap the laces around.  But it would be faaaaaaaar from the first time I ignored an instruction booklet.

PHall

There are many, many ways to blouse boots. Take ten people and you will find ten different ways to do it.
And every one of them is the "right" way....     As long as the results meet the requirements of CAPM 39-1, who cares how you did it?

lordmonar

Quote from: PHall on May 17, 2015, 03:08:07 PM
There are many, many ways to blouse boots. Take ten people and you will find ten different ways to do it.
And every one of them is the "right" way....     As long as the results meet the requirements of CAPM 39-1, who cares how you did it?
+1
PATRICK M. HARRIS, SMSgt, CAP

JC004

#27
AAFES is unloading their woodland color blousing bands for half the price of Vanguard.  We should stock up.

I've been doing a BUNCH of edits to the master list of tips above.  Additions are welcome.  I'd like to make a printable packet that can be shared.

39-1 should not exist in a vacuum.  People who don't have a military or cadet background are easily overwhelmed and confused by 39-1.  Having tutorial-type information provides context and fills the gaps.

lordmonar

I'm leery of a "list of uniform tips" because "good ideas" and "short cuts that worked for me" slowly become "this is the only acceptable way of doing XYZ".
PATRICK M. HARRIS, SMSgt, CAP

Mela_007

Thanks for sharing!  These are great.
"Worry is the Darkroom in which negatives develop."  -Unknown

Sapper168

Quote from: lordmonar on May 18, 2015, 12:55:45 AM
I'm leery of a "list of uniform tips" because "good ideas" and "short cuts that worked for me" slowly become "this is the only acceptable way of doing XYZ".

CAP Urban Legends.

Have ran across this with cadets in my squadron, especially when it comes to utilizing cargo pockets and pockets on the bdu top.  Somehow It went from "It looks better when they are empty" to "the regs prohibit you from using those pockets."   
Shane E Guernsey, TSgt, CAP
CAP Squadron ESO... "Who did what now?"
CAP Squadron NCO Advisor... "Where is the coffee located?"
US Army 12B... "Sappers Lead the Way!"
US Army Reserve 71L-f5... "Going Postal!"

NorCal21

Awesome list guys!

One thing I always wear are my shirt stays. It's a habit from the Marines. Of course I have had my trousers and shirts tailored first, and then I still use the stays because it keeps the shirt pulled taught. Looks better than when it starts backing out of your belt line because you get up and down or bend over and stand back up. I think this is more the extra mile though than what I think most people would do.

NorCal21

Quote from: MSG Mac on May 17, 2015, 12:37:22 AM
When blousing your trousers, blouse them from the inside. This keeps the trousers from riding up or becoming unbloused.

1. Put on trousers
2. put on boots
3. Lower the trousers, create an inside cuff and wrap the blousing band* around your cuff and boot.
4. Raise trousers, buckle belt.
The trousers will be taut when pulled up.

*Use the Velcro 1 inch blousing bands.

You know, I do it the way I was taught in the Marines. Has served me well so far.

Wrap the laces around the top of your boot and then tie the bow. Place the blousing band between 2nd and 3rd eyelets. Don't pull your trousers all the way yet where they would normally sit on your waist. Blouse the trouser legs. Pull up trousers and button them. This gets you a tight blouse and one that is neat versus having a bunch of material hanging down and over the blousing point. Of course you're going to get some material hanging down as you work throughout the day.

HGjunkie

Quote from: NorCal21 on May 23, 2015, 10:03:16 PM
Quote from: MSG Mac on May 17, 2015, 12:37:22 AM
When blousing your trousers, blouse them from the inside. This keeps the trousers from riding up or becoming unbloused.

1. Put on trousers
2. put on boots
3. Lower the trousers, create an inside cuff and wrap the blousing band* around your cuff and boot.
4. Raise trousers, buckle belt.
The trousers will be taut when pulled up.

*Use the Velcro 1 inch blousing bands.

You know, I do it the way I was taught in the Marines. Has served me well so far.

Wrap the laces around the top of your boot and then tie the bow. Place the blousing band between 2nd and 3rd eyelets. Don't pull your trousers all the way yet where they would normally sit on your waist. Blouse the trouser legs. Pull up trousers and button them. This gets you a tight blouse and one that is neat versus having a bunch of material hanging down and over the blousing point. Of course you're going to get some material hanging down as you work throughout the day.
Won't that mean the pants are draped down on the top portion of the boot though?
••• retired
2d Lt USAF

Alaric

I like to look good in what I'm wearing as much as the next guy, but if we spent half the time we spend jawjacking about uniforms on our actual missions, we would be a force to be reckoned with.

Storm Chaser

#35
Quote from: Alaric on May 24, 2015, 06:25:08 AM
I like to look good in what I'm wearing as much as the next guy, but if we spent half the time we spend jawjacking about uniforms on our actual missions, we would be a force to be reckoned with.

That is so true.

Our uniforms should look good. But if you're spending more time on your uniform than on the mission, you're doing it wrong.

NIN

I snagged on of these measuring devices last year:


It works a treat for quickly and easily doing shoulder-sleeve insignia and collar insignia.
Darin Ninness, Col, CAP
Wing Dude, National Bubba
I like to have Difficult Adult Conversations™
The contents of this post are Copyright © 2007-2024 by NIN. All rights are reserved. Specific permission is given to quote this post here on CAP-Talk only.

MIKE

Quote from: NIN on May 24, 2015, 03:29:49 PM
I snagged on of these measuring devices last year:


It works a treat for quickly and easily doing shoulder-sleeve insignia and collar insignia.

I use one of these: http://www.rangerjoes.com/Ruler-Uniform-P727.aspx


Comes in really handy for ribbons and nametags... especially when they need to be spaced 1/4" above the pocket... Unlike CAP.
Mike Johnston

Protohuman

HERE IS A CHRISTMAS DISCOUNT CODE FOR VANGUARD  IT IS FOR 15% OFF AND[ FREE SHIPPING ON ORDERS OVER $25.  IF THE WEBSITE WON'T TAKE THE CODE CALL THEM AND ASK FOR A SUPERVISOR OR EMAIL CUSTOMER SERVICE  http://www.goodsearch.com/vanguard-industries/coupons?open=11813915#filter-promo-code

PHall

Quote from: Protohuman on December 17, 2015, 08:53:14 PM
HERE IS A CHRISTMAS DISCOUNT CODE FOR VANGUARD  IT IS FOR 15% OFF AND[ FREE SHIPPING ON ORDERS OVER $25.  IF THE WEBSITE WON'T TAKE THE CODE CALL THEM AND ASK FOR A SUPERVISOR OR EMAIL CUSTOMER SERVICE  http://www.goodsearch.com/vanguard-industries/coupons?open=11813915#filter-promo-code


WHY ARE YOU YELLING?????????     All CAPS is considered yelling on the Internet. And the Vanguard monthly discount is not worth yelling about.